MDSCR_EL1 | Jon's Arm Reference

AArch64 System register MDSCR_EL1 bits [31:0] are architecturally mapped to AArch32 System register DBGDSCRext[31:0].

AArch64 System register MDSCR_EL1 bit [15] is architecturally mapped to AArch32 System register DBGDSCRint[15].

AArch64 System register MDSCR_EL1 bit [12] is architecturally mapped to AArch32 System register DBGDSCRint[12].

AArch64 System register MDSCR_EL1 bits [5:2] are architecturally mapped to AArch32 System register DBGDSCRint[5:2].

AArch64 System register MDSCR_EL1 bits [30:29] are architecturally mapped to External register EDSCR[30:29].

AArch64 System register MDSCR_EL1 bits [63:32] are architecturally mapped to External register EDSCR2[31:0].

Attributes

Field descriptions

Bits [63:51]

EnSTEPOP, bit [50]

When FEAT_STEP2 is implemented:

Software step control bit. If EL_D is using AArch64, enable execution from MDSTEPOP_EL1. Permitted values are:

EnSTEPOP	Meaning
0b0	Execution from MDSTEPOP_EL1 is disabled.
0b1	Execution from MDSTEPOP_EL1 is not disabled by this control.

RES0 if EL_D is using AArch32.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Otherwise:

Bits [49:36]

EHBWE, bit [35]

When FEAT_Debugv8p9 is implemented:

Extended Halting Breakpoint and Watchpoint Enable. Used for save/restore of EDSCR2.EHBWE.

When OSLSR_EL1.OSLK is 0, software must treat this field as UNK/SBZP.

When OSLSR_EL1.OSLK is 1, this field holds the value of EDSCR2.EHBWE. Reads and writes of this field are indirect accesses to EDSCR2.EHBWE.

It is IMPLEMENTATION DEFINED whether this field is implemented or is RES0 when 16 or fewer breakpoints are implemented, 16 or fewer watchpoints are implemented, and MDSELR_EL1 is implemented as RAZ/WI.

The reset behavior of this field is:

On a Cold reset, this field resets to 0.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 0, access to this field is RO.
Otherwise, access to this field is RW.

Otherwise:

EnSPM, bit [34]

When FEAT_SPMU is implemented:

Enable access to System PMU registers. When disabled, accesses to System PMU registers generate a trap to EL1.

EnSPM	Meaning
0b0	Accesses of the specified System PMU registers at EL0 are trapped to EL1, unless the instruction generates a higher priority exception.
0b1	Accesses of the specified System PMU registers are not trapped by this mechanism.

In AArch64 state, the instructions affected by this control are: MRS and MSR accesses to SPMCNTENCLR_EL0, SPMCNTENSET_EL0, SPMCR_EL0, SPMEVCNTR<n>_EL0, SPMEVFILT2R<n>_EL0, SPMEVFILTR<n>_EL0, SPMEVTYPER<n>_EL0, SPMOVSCLR_EL0, SPMOVSSET_EL0, and SPMSELR_EL0.

Unless the instruction generates a higher priority exception:

If EL2 is implemented and enabled in the current Security state, and HCR_EL2.TGE is 1, then trapped instructions generate an exception to EL2.
Otherwise, trapped instructions generate an exception to EL1.

Trapped instructions are reported using EC syndrome value 0x18.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Otherwise:

TTA, bit [33]

When FEAT_TRBE_EXT is implemented or FEAT_ETEv1p3 is implemented:

Trap Trace Accesses. Used for save/restore of EDSCR2.TTA.

When OSLSR_EL1.OSLK is 0, software must treat this field as UNK/SBZP.

When OSLSR_EL1.OSLK is 1, this field holds the value of EDSCR2.TTA. Reads and writes of this field are indirect accesses to EDSCR2.TTA.

The reset behavior of this field is:

On a Cold reset, this field resets to 0.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 0, access to this field is RO.
Otherwise, access to this field is RW.

Otherwise:

EMBWE, bit [32]

When FEAT_Debugv8p9 is implemented:

Extended Monitor Breakpoint and Watchpoint Enable. Enables use of additional breakpoints or watchpoints.

EMBWE	Meaning
0b0	Breakpoint and Watchpoint exceptions are disabled for each breakpoint <n> and watchpoint <n>, where n is greater than or equal to 16. The Effective value of MDSELR_EL1.BANK is zero at EL1.
0b1	Breakpoint and Watchpoint exceptions are not affected by this mechanism. The Effective value of MDSELR_EL1.BANK is not affected by this field.

EMBWE

Meaning

0b0

Breakpoint and Watchpoint exceptions are disabled for each breakpoint <n> and watchpoint <n>, where n is greater than or equal to 16.

The Effective value of MDSELR_EL1.BANK is zero at EL1.

0b1

Breakpoint and Watchpoint exceptions are not affected by this mechanism.

The Effective value of MDSELR_EL1.BANK is not affected by this field.

This field is ignored by the PE and treated as zero when any of the following are true:

EL3 is implemented and MDCR_EL3.EBWE is 0.
EL2 is implemented and enabled in the current Security state, and MDCR_EL2.EBWE is 0.

The reset behavior of this field is:

On a Warm reset:
- When the highest implemented Exception level is EL1, this field resets to 0.
- Otherwise, this field resets to an architecturally UNKNOWN value.

Otherwise:

TFO, bit [31]

When FEAT_TRF is implemented:

Trace Filter override. Used for save/restore of EDSCR.TFO.

When OSLSR_EL1.OSLK == 0, software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this bit holds the value of EDSCR.TFO. Reads and writes of this bit are indirect accesses to EDSCR.TFO.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

Otherwise:

RXfull, bit [30]

Used for save/restore of EDSCR.RXfull.

When OSLSR_EL1.OSLK == 0, software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this bit holds the value of EDSCR.RXfull. Reads and writes of this bit are indirect accesses to EDSCR.RXfull.

The architected behavior of this field determines the value it returns after a reset.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

TXfull, bit [29]

Used for save/restore of EDSCR.TXfull.

When OSLSR_EL1.OSLK == 0, software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this bit holds the value of EDSCR.TXfull. Reads and writes of this bit are indirect accesses to EDSCR.TXfull.

The architected behavior of this field determines the value it returns after a reset.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

Bit [28]

RXO, bit [27]

Used for save/restore of EDSCR.RXO.

When OSLSR_EL1.OSLK == 0, software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this bit holds the value of EDSCR.RXO. Reads and writes of this bit are indirect accesses to EDSCR.RXO.

When OSLSR_EL1.OSLK == 1, if bits [27,6] of the value written to MDSCR_EL1 are {1,0}, that is, the RXO bit is 1 and the ERR bit is 0, the PE sets EDSCR.{RXO,ERR} to UNKNOWN values.

The architected behavior of this field determines the value it returns after a reset.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

TXU, bit [26]

Used for save/restore of EDSCR.TXU.

When OSLSR_EL1.OSLK == 0, software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this bit holds the value of EDSCR.TXU. Reads and writes of this bit are indirect accesses to EDSCR.TXU.

When OSLSR_EL1.OSLK == 1, if bits [26,6] of the value written to MDSCR_EL1 are {1,0}, that is, the TXU bit is 1 and the ERR bit is 0, the PE sets EDSCR.{TXU,ERR} to UNKNOWN values.

The architected behavior of this field determines the value it returns after a reset.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

Bits [25:24]

INTdis, bits [23:22]

Used for save/restore of EDSCR.INTdis.

When OSLSR_EL1.OSLK == 0, and software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this field holds the value of EDSCR.INTdis. Reads and writes of this field are indirect accesses to EDSCR.INTdis.

The architected behavior of this field determines the value it returns after a reset.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

TDA, bit [21]

Used for save/restore of EDSCR.TDA.

When OSLSR_EL1.OSLK == 0, software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this bit holds the value of EDSCR.TDA. Reads and writes of this bit are indirect accesses to EDSCR.TDA.

The architected behavior of this field determines the value it returns after a reset.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

Bit [20]

SC2, bit [19]

When FEAT_PCSRv8 is implemented, FEAT_VHE is implemented and FEAT_PCSRv8p2 is not implemented:

Used for save/restore of EDSCR.SC2.

When OSLSR_EL1.OSLK == 0, software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this bit holds the value of EDSCR.SC2. Reads and writes of this bit are indirect accesses to EDSCR.SC2.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

Otherwise:

Bits [18:16]

MDE, bit [15]

Monitor debug events. Enable Breakpoint, Watchpoint, and Vector Catch exceptions.

MDE	Meaning
0b0	Breakpoint, Watchpoint, and Vector Catch exceptions disabled.
0b1	Breakpoint, Watchpoint, and Vector Catch exceptions enabled.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

HDE, bit [14]

Used for save/restore of EDSCR.HDE.

When OSLSR_EL1.OSLK == 0, software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this bit holds the value of EDSCR.HDE. Reads and writes of this bit are indirect accesses to EDSCR.HDE.

The architected behavior of this field determines the value it returns after a reset.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

KDE, bit [13]

Local (kernel) debug enable. If EL_D is using AArch64, enable debug exceptions within EL_D. Permitted values are:

KDE	Meaning
0b0	Debug exceptions, other than Breakpoint Instruction exceptions, disabled within EL_D.
0b1	All debug exceptions enabled within EL_D.

RES0 if EL_D is using AArch32.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

TDCC, bit [12]

Traps EL0 accesses to the Debug Communication Channel (DCC) registers to EL1, or to EL2 when it is implemented and enabled for the current Security state and HCR_EL2.TGE is 1, from both Execution states, as follows:

In AArch64 state, MRS or MSR accesses to the following DCC registers are trapped, reported using EC syndrome value 0x18:
- MDCCSR_EL0.
- If not in Debug state, DBGDTR_EL0, DBGDTRTX_EL0, and DBGDTRRX_EL0.
In AArch32 state, MRC or MCR accesses to the following registers are trapped, reported using EC syndrome value 0x05.
- DBGDSCRint, DBGDIDR, DBGDSAR, DBGDRAR.
- If not in Debug state, DBGDTRRXint, and DBGDTRTXint.
In AArch32 state, LDC access to DBGDTRRXint and STC access to DBGDTRTXint are trapped, reported using EC syndrome value 0x06.
In AArch32 state, MRRC accesses to DBGDSAR and DBGDRAR are trapped, reported using EC syndrome value 0x0C.

TDCC	Meaning
0b0	This control does not cause any instructions to be trapped.
0b1	EL0 using AArch64: EL0 accesses to the AArch64 DCC registers are trapped. EL0 using AArch32: EL0 accesses to the AArch32 DCC registers are trapped.

TDCC

Meaning

0b0

This control does not cause any instructions to be trapped.

0b1

EL0 using AArch64: EL0 accesses to the AArch64 DCC registers are trapped.

EL0 using AArch32: EL0 accesses to the AArch32 DCC registers are trapped.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Bits [11:7]

ERR, bit [6]

Used for save/restore of EDSCR.ERR.

When OSLSR_EL1.OSLK == 0, software must treat this bit as UNK/SBZP.

When OSLSR_EL1.OSLK == 1, this bit holds the value of EDSCR.ERR. Reads and writes of this bit are indirect accesses to EDSCR.ERR.

The architected behavior of this field determines the value it returns after a reset.

Accessing this field has the following behavior:

When OSLSR_EL1.OSLK == 1, access to this field is RW.
When OSLSR_EL1.OSLK == 0, access to this field is RO.

Bits [5:1]

SS, bit [0]

Software step control bit. If EL_D is using AArch64, enable Software step. Permitted values are:

SS	Meaning
0b0	Software step disabled
0b1	Software step enabled.

RES0 if EL_D is using AArch32.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Accessing MDSCR_EL1

Accesses to this register use the following encodings in the System register encoding space:

MRS <Xt>, MDSCR_EL1

op0	op1	CRn	CRm	op2
0b10	0b000	0b0000	0b0010	0b010

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if HaveEL(EL3) && EL3SDDUndefPriority() && MDCR_EL3.TDA == '1' then UNDEFINED; elsif EL2Enabled() && IsFeatureImplemented(FEAT_FGT) && (!HaveEL(EL3) || SCR_EL3.FGTEn == '1') && HDFGRTR_EL2.MDSCR_EL1 == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && MDCR_EL2.<TDE,TDA> != '00' then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); elsif EffectiveHCR_EL2_NVx() == '1x1' then X[t, 64] = NVMem[0x158]; else X[t, 64] = MDSCR_EL1; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && EL3SDDUndefPriority() && MDCR_EL3.TDA == '1' then UNDEFINED; elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 64] = MDSCR_EL1; elsif PSTATE.EL == EL3 then X[t, 64] = MDSCR_EL1;

MSR MDSCR_EL1, <Xt>

op0	op1	CRn	CRm	op2
0b10	0b000	0b0000	0b0010	0b010

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if HaveEL(EL3) && EL3SDDUndefPriority() && MDCR_EL3.TDA == '1' then UNDEFINED; elsif EL2Enabled() && IsFeatureImplemented(FEAT_FGT) && (!HaveEL(EL3) || SCR_EL3.FGTEn == '1') && HDFGWTR_EL2.MDSCR_EL1 == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && MDCR_EL2.<TDE,TDA> != '00' then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); elsif EffectiveHCR_EL2_NVx() == '1x1' then NVMem[0x158] = X[t, 64]; else MDSCR_EL1 = X[t, 64]; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && EL3SDDUndefPriority() && MDCR_EL3.TDA == '1' then UNDEFINED; elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else MDSCR_EL1 = X[t, 64]; elsif PSTATE.EL == EL3 then MDSCR_EL1 = X[t, 64];

MDSCR_EL1: Monitor Debug System Control Register

Purpose

Configuration

Attributes

Field descriptions

Bits [63:51]

EnSTEPOP, bit [50]

When FEAT_STEP2 is implemented:

Otherwise:

Bits [49:36]

EHBWE, bit [35]

When FEAT_Debugv8p9 is implemented:

Otherwise:

EnSPM, bit [34]

When FEAT_SPMU is implemented:

Otherwise:

TTA, bit [33]

When FEAT_TRBE_EXT is implemented or FEAT_ETEv1p3 is implemented:

Otherwise:

EMBWE, bit [32]

When FEAT_Debugv8p9 is implemented:

Otherwise:

TFO, bit [31]

When FEAT_TRF is implemented:

Otherwise:

RXfull, bit [30]

TXfull, bit [29]

Bit [28]

RXO, bit [27]

TXU, bit [26]

Bits [25:24]

INTdis, bits [23:22]

TDA, bit [21]

Bit [20]

SC2, bit [19]

When FEAT_PCSRv8 is implemented, FEAT_VHE is implemented and FEAT_PCSRv8p2 is not implemented:

Otherwise:

Bits [18:16]

MDE, bit [15]

HDE, bit [14]

KDE, bit [13]

TDCC, bit [12]

Bits [11:7]

ERR, bit [6]

Bits [5:1]

SS, bit [0]

Accessing MDSCR_EL1

63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48	47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0													EnSTEPOP	RES0														EHBWE	EnSPM	TTA	EMBWE
TFO	RXfull	TXfull	RES0	RXO	TXU	RES0		INTdis		TDA	RES0	SC2	RAZ/WI			MDE	HDE	KDE	TDCC	RES0					ERR	RES0					SS

MDSCR_EL1: Monitor Debug System Control Register

Purpose

Configuration

Attributes

Field descriptions

Bits [63:51]

EnSTEPOP, bit [50]When FEAT_STEP2 is implemented:

Otherwise:

Bits [49:36]

EHBWE, bit [35]When FEAT_Debugv8p9 is implemented:

Otherwise:

EnSPM, bit [34]When FEAT_SPMU is implemented:

Otherwise:

TTA, bit [33]When FEAT_TRBE_EXT is implemented or FEAT_ETEv1p3 is implemented:

Otherwise:

EMBWE, bit [32]When FEAT_Debugv8p9 is implemented:

Otherwise:

TFO, bit [31]When FEAT_TRF is implemented:

Otherwise:

RXfull, bit [30]

TXfull, bit [29]

Bit [28]

RXO, bit [27]

TXU, bit [26]

Bits [25:24]

INTdis, bits [23:22]

TDA, bit [21]

Bit [20]

SC2, bit [19]When FEAT_PCSRv8 is implemented, FEAT_VHE is implemented and FEAT_PCSRv8p2 is not implemented:

Otherwise:

Bits [18:16]

MDE, bit [15]

HDE, bit [14]

KDE, bit [13]

TDCC, bit [12]

Bits [11:7]

ERR, bit [6]

Bits [5:1]

SS, bit [0]

Accessing MDSCR_EL1

EnSTEPOP, bit [50]

When FEAT_STEP2 is implemented:

EHBWE, bit [35]

When FEAT_Debugv8p9 is implemented:

EnSPM, bit [34]

When FEAT_SPMU is implemented:

TTA, bit [33]

When FEAT_TRBE_EXT is implemented or FEAT_ETEv1p3 is implemented:

EMBWE, bit [32]

When FEAT_Debugv8p9 is implemented:

TFO, bit [31]

When FEAT_TRF is implemented:

SC2, bit [19]

When FEAT_PCSRv8 is implemented, FEAT_VHE is implemented and FEAT_PCSRv8p2 is not implemented: