Transfers data from an external debugger to the PE. For example, it is used by a debugger transferring commands and data to a debug target. See DBGDTR_EL0 for additional architectural mappings. It is a component of the Debug Communications Channel.
AArch64 System register DBGDTRRX_EL0 bits [31:0] are architecturally mapped to AArch32 System register DBGDTRRXint[31:0].
AArch64 System register DBGDTRRX_EL0 bits [31:0] are architecturally mapped to External register DBGDTRRX_EL0[31:0].
DBGDTRRX_EL0 is a 64-bit register.
| 63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RES0 | |||||||||||||||||||||||||||||||
| Update DTRRX | |||||||||||||||||||||||||||||||
Reserved, RES0.
Update DTRRX.
Reads of this register:
If RXfull is set to 1, return the last value written to DTRRX.
If RXfull is set to 0, return an UNKNOWN value.
After the read, RXfull is cleared to 0.
For the full behavior of the Debug Communications Channel, see 'The Debug Communication Channel and Instruction Transfer Register'.
The reset behavior of this field is:
Accesses to this register use the following encodings in the System register encoding space:
MRS <Xt>, DBGDTRRX_EL0
| op0 | op1 | CRn | CRm | op2 |
|---|---|---|---|---|
| 0b10 | 0b011 | 0b0000 | 0b0101 | 0b000 |
if Halted() then X[t, 32] = Read_DBGDTR_EL0(32); elsif PSTATE.EL == EL0 then if MDSCR_EL1.TDCC == '1' then if EL2Enabled() && HCR_EL2.TGE == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else AArch64.SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && MDCR_EL2.TDCC == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && (HCR_EL2.TGE == '1' || MDCR_EL2.<TDE,TDA> != '00') then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDCC == '1' then AArch64.SystemAccessTrap(EL3, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 32] = Read_DBGDTR_EL0(32); elsif PSTATE.EL == EL1 then if EL2Enabled() && MDCR_EL2.TDCC == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && MDCR_EL2.<TDE,TDA> != '00' then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDCC == '1' then AArch64.SystemAccessTrap(EL3, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 32] = Read_DBGDTR_EL0(32); elsif PSTATE.EL == EL2 then if HaveEL(EL3) && MDCR_EL3.TDCC == '1' then AArch64.SystemAccessTrap(EL3, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 32] = Read_DBGDTR_EL0(32); elsif PSTATE.EL == EL3 then X[t, 32] = Read_DBGDTR_EL0(32);