Provides information about the instruction sets implemented by the PE in AArch32 state.
Must be interpreted with ID_ISAR0_EL1, ID_ISAR1_EL1, ID_ISAR2_EL1, ID_ISAR3_EL1, and ID_ISAR5_EL1.
For general information about the interpretation of the ID registers, see 'Principles of the ID scheme for fields in ID registers'.
AArch64 System register ID_ISAR4_EL1 bits [31:0] are architecturally mapped to AArch32 System register ID_ISAR4[31:0].
ID_ISAR4_EL1 is a 64-bit register.
| 63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RES0 | |||||||||||||||||||||||||||||||
| SWP_frac | PSR_M | SynchPrim_frac | Barrier | SMC | Writeback | WithShifts | Unpriv | ||||||||||||||||||||||||
Reserved, RES0.
Indicates support for the memory system locking the bus for SWP or SWPB instructions.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SWP_frac | Meaning |
|---|---|
| 0b0000 |
SWP or SWPB instructions not implemented. |
| 0b0001 |
SWP or SWPB implemented but only in a uniprocessor context. SWP and SWPB do not guarantee whether memory accesses from other Requesters can come between the load memory access and the store memory access of the SWP or SWPB. |
All other values are reserved. This field is valid only if ID_ISAR0.Swap is 0b0000.
In Armv8-A, the only permitted value is 0b0000.
Access to this field is RO.
Indicates the implemented M-profile instructions to modify the PSRs.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| PSR_M | Meaning |
|---|---|
| 0b0000 |
None implemented. |
| 0b0001 |
Adds the M-profile forms of the CPS, MRS, and MSR instructions. |
All other values are reserved.
In Armv8-A, the only permitted value is 0b0000.
Access to this field is RO.
Used in conjunction with ID_ISAR3.SynchPrim to indicate the implemented Synchronization Primitive instructions.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SynchPrim_frac | Meaning |
|---|---|
| 0b0000 |
If SynchPrim == 0b0000, no Synchronization Primitives implemented. If SynchPrim == 0b0001, adds the LDREX and STREX instructions. If SynchPrim == 0b0010, also adds the CLREX, LDREXB, LDREXH, STREXB, STREXH, LDREXD, and STREXD instructions. |
| 0b0011 |
If SynchPrim == 0b0001, adds the LDREX, STREX, CLREX, LDREXB, LDREXH, STREXB, and STREXH instructions. |
All other combinations of SynchPrim and SynchPrim_frac are reserved.
In Armv8-A, the only permitted value is 0b0000.
Access to this field is RO.
Indicates the implemented Barrier instructions in the A32 and T32 instruction sets.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| Barrier | Meaning |
|---|---|
| 0b0000 |
None implemented. Barrier operations are provided only as System instructions in the (coproc==0b1111) encoding space. |
| 0b0001 |
Adds the DMB, DSB, and ISB barrier instructions. |
All other values are reserved.
In Armv8-A, the only permitted value is 0b0001.
Access to this field is RO.
Indicates the implemented SMC instructions.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SMC | Meaning |
|---|---|
| 0b0000 |
None implemented. |
| 0b0001 |
Adds the SMC instruction. |
All other values are reserved.
In Armv8-A, the permitted values are:
If EL3 is implemented and EL1 can use AArch32, the only permitted value is 0b0001.
If neither EL3 nor EL2 is implemented, the only permitted value is 0b0000.
If EL1 cannot use AArch32, this field has the value 0b0000.
Access to this field is RO.
Indicates the support for Writeback addressing modes.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| Writeback | Meaning |
|---|---|
| 0b0000 |
Basic support. Only the LDM, STM, PUSH, POP, SRS, and RFE instructions support writeback addressing modes. These instructions support all of their writeback addressing modes. |
| 0b0001 |
Adds support for all of the writeback addressing modes. |
All other values are reserved.
In Armv8-A, the only permitted value is 0b0001.
Access to this field is RO.
Indicates the support for instructions with shifts.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| WithShifts | Meaning |
|---|---|
| 0b0000 |
Nonzero shifts supported only in MOV and shift instructions. |
| 0b0001 |
Adds support for shifts of loads and stores over the range LSL 0-3. |
| 0b0011 |
As for 0b0001, and adds support for other constant shift options, both on load/store and other instructions. |
| 0b0100 |
As for 0b0011, and adds support for register-controlled shift options. |
All other values are reserved.
In Armv8-A, the only permitted value is 0b0100.
Access to this field is RO.
Indicates the implemented unprivileged instructions.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| Unpriv | Meaning |
|---|---|
| 0b0000 |
None implemented. No T variant instructions are implemented. |
| 0b0001 |
Adds the LDRBT, LDRT, STRBT, and STRT instructions. |
| 0b0010 |
As for 0b0001, and adds the LDRHT, LDRSBT, LDRSHT, and STRHT instructions. |
All other values are reserved.
In Armv8-A, the only permitted value is 0b0010.
Access to this field is RO.
| 63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| UNKNOWN | |||||||||||||||||||||||||||||||
| UNKNOWN | |||||||||||||||||||||||||||||||
Reserved, UNKNOWN.
Accesses to this register use the following encodings in the System register encoding space:
MRS <Xt>, ID_ISAR4_EL1
| op0 | op1 | CRn | CRm | op2 |
|---|---|---|---|---|
| 0b11 | 0b000 | 0b0000 | 0b0010 | 0b100 |
if PSTATE.EL == EL0 then if IsFeatureImplemented(FEAT_IDST) then if EL2Enabled() && HCR_EL2.TGE == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else AArch64.SystemAccessTrap(EL1, 0x18); else UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && HCR_EL2.TID3 == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else X[t, 64] = ID_ISAR4_EL1; elsif PSTATE.EL == EL2 then X[t, 64] = ID_ISAR4_EL1; elsif PSTATE.EL == EL3 then X[t, 64] = ID_ISAR4_EL1;