TRCCIDCVR<n>: Trace Context Identifier Comparator Value Registers <n>, n = 0 - 7

Purpose

Contains a Context identifier value.

Configuration

External register TRCCIDCVR<n> bits [63:0] are architecturally mapped to AArch64 System register TRCCIDCVR<n>[63:0].

This register is present only when FEAT_ETE is implemented, FEAT_TRC_EXT is implemented and UInt(TRCIDR4.NUMCIDC) > n. Otherwise, direct accesses to TRCCIDCVR<n> are RES0.

Attributes

TRCCIDCVR<n> is a 64-bit register.

Field descriptions

63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48	47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
VALUE
VALUE

VALUE, bits [63:0]

Context identifier value. The width of this field is indicated by TRCIDR2.CIDSIZE. Unimplemented bits are RES0. After a PE Reset, the trace unit assumes that the Context identifier is zero until the PE updates the Context identifier.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing TRCCIDCVR<n>

Must be programmed if any of the following are true:

TRCRSCTLR<a>.GROUP == 0b0110 and TRCRSCTLR<a>.CID[n] == 1.
TRCACATR<a>.CONTEXTTYPE == 0b01 or 0b11 and TRCACATR<a>.CONTEXT == n.

Writes are CONSTRAINED UNPREDICTABLE if the trace unit is not in the Idle state.

TRCCIDCVR<n> can be accessed through the external debug interface:

Component	Offset	Instance
ETE	0x600 + (8 * n)	TRCCIDCVR<n>

This interface is accessible as follows:

When OSLockStatus(), or !AllowExternalTraceAccess() or !IsTraceCorePowered(), accesses to this register generate an error response.
Otherwise, accesses to this register are RW.