TRCCIDCCTLR1 | Jon's Arm Reference

Contains Context identifier mask values for the TRCCIDCVR<n> registers, for n = 4 to 7.

Configuration

External register TRCCIDCCTLR1 bits [31:0] are architecturally mapped to AArch64 System register TRCCIDCCTLR1[31:0].

This register is present only when FEAT_ETE is implemented, FEAT_TRC_EXT is implemented, UInt(TRCIDR4.NUMCIDC) > 0x4 and UInt(TRCIDR2.CIDSIZE) > 0. Otherwise, direct accesses to TRCCIDCCTLR1 are RES0.

Attributes

Field descriptions

COMP7[<m>], bit [m+24], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 7:

TRCCIDCVR7 mask control. Specifies the mask value that the trace unit applies to TRCCIDCVR7. Each bit in this field corresponds to a byte in TRCCIDCVR7.

COMP7[<m>]	Meaning
0b0	The trace unit includes TRCCIDCVR7[(m×8+7):(m×8)] when it performs the Context identifier comparison.
0b1	The trace unit ignores TRCCIDCVR7[(m×8+7):(m×8)] when it performs the Context identifier comparison.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing this field has the following behavior:

When m >= UInt(TRCIDR2.CIDSIZE), access to this field is RES0.
Otherwise, access to this field is RW.

Otherwise:

COMP6[<m>], bit [m+16], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 6:

TRCCIDCVR6 mask control. Specifies the mask value that the trace unit applies to TRCCIDCVR6. Each bit in this field corresponds to a byte in TRCCIDCVR6.

COMP6[<m>]	Meaning
0b0	The trace unit includes TRCCIDCVR6[(m×8+7):(m×8)] when it performs the Context identifier comparison.
0b1	The trace unit ignores TRCCIDCVR6[(m×8+7):(m×8)] when it performs the Context identifier comparison.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing this field has the following behavior:

When m >= UInt(TRCIDR2.CIDSIZE), access to this field is RES0.
Otherwise, access to this field is RW.

Otherwise:

COMP5[<m>], bit [m+8], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 5:

TRCCIDCVR5 mask control. Specifies the mask value that the trace unit applies to TRCCIDCVR5. Each bit in this field corresponds to a byte in TRCCIDCVR5.

COMP5[<m>]	Meaning
0b0	The trace unit includes TRCCIDCVR5[(m×8+7):(m×8)] when it performs the Context identifier comparison.
0b1	The trace unit ignores TRCCIDCVR5[(m×8+7):(m×8)] when it performs the Context identifier comparison.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing this field has the following behavior:

When m >= UInt(TRCIDR2.CIDSIZE), access to this field is RES0.
Otherwise, access to this field is RW.

Otherwise:

COMP4[<m>], bit [m], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 4:

TRCCIDCVR4 mask control. Specifies the mask value that the trace unit applies to TRCCIDCVR4. Each bit in this field corresponds to a byte in TRCCIDCVR4.

COMP4[<m>]	Meaning
0b0	The trace unit includes TRCCIDCVR4[(m×8+7):(m×8)] when it performs the Context identifier comparison.
0b1	The trace unit ignores TRCCIDCVR4[(m×8+7):(m×8)] when it performs the Context identifier comparison.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing this field has the following behavior:

When m >= UInt(TRCIDR2.CIDSIZE), access to this field is RES0.
Otherwise, access to this field is RW.

Otherwise:

Accessing TRCCIDCCTLR1

If software uses the TRCCIDCVR<n> registers, for n = 4 to 7, then it must program this register.

If software sets a mask bit to 1 then it must program the relevant byte in TRCCIDCVR<n> to 0x00.

If any bit is 1 and the relevant byte in TRCCIDCVR<n> is not 0x00, the behavior of the Context Identifier Comparator is CONSTRAINED UNPREDICTABLE. In this scenario the comparator might match unexpectedly or might not match.

Writes are CONSTRAINED UNPREDICTABLE if the trace unit is not in the Idle state.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
COMP7[7]	COMP7[6]	COMP7[5]	COMP7[4]	COMP7[3]	COMP7[2]	COMP7[1]	COMP7[0]	COMP6[7]	COMP6[6]	COMP6[5]	COMP6[4]	COMP6[3]	COMP6[2]	COMP6[1]	COMP6[0]	COMP5[7]	COMP5[6]	COMP5[5]	COMP5[4]	COMP5[3]	COMP5[2]	COMP5[1]	COMP5[0]	COMP4[7]	COMP4[6]	COMP4[5]	COMP4[4]	COMP4[3]	COMP4[2]	COMP4[1]	COMP4[0]

TRCCIDCCTLR1: Trace Context Identifier Comparator Control Register 1

Purpose

Configuration

Attributes

Field descriptions

COMP7[<m>], bit [m+24], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 7:

Otherwise:

COMP6[<m>], bit [m+16], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 6:

Otherwise:

COMP5[<m>], bit [m+8], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 5:

Otherwise:

COMP4[<m>], bit [m], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 4:

Otherwise:

Accessing TRCCIDCCTLR1

TRCCIDCCTLR1 can be accessed through the external debug interface:

TRCCIDCCTLR1: Trace Context Identifier Comparator Control Register 1

Purpose

Configuration

Attributes

Field descriptions

COMP7[<m>], bit [m+24], for m = 7 to 0When UInt(TRCIDR4.NUMCIDC) > 7:

Otherwise:

COMP6[<m>], bit [m+16], for m = 7 to 0When UInt(TRCIDR4.NUMCIDC) > 6:

Otherwise:

COMP5[<m>], bit [m+8], for m = 7 to 0When UInt(TRCIDR4.NUMCIDC) > 5:

Otherwise:

COMP4[<m>], bit [m], for m = 7 to 0When UInt(TRCIDR4.NUMCIDC) > 4:

Otherwise:

Accessing TRCCIDCCTLR1

TRCCIDCCTLR1 can be accessed through the external debug interface:

COMP7[<m>], bit [m+24], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 7:

COMP6[<m>], bit [m+16], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 6:

COMP5[<m>], bit [m+8], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 5:

COMP4[<m>], bit [m], for m = 7 to 0

When UInt(TRCIDR4.NUMCIDC) > 4: