AMIIDR

It is IMPLEMENTATION DEFINED whether AMIIDR is implemented in the Core power domain or in the Debug power domain.

This register is present only when FEAT_AMUv1 is implemented and FEAT_AMU_EXT is implemented. Otherwise, direct accesses to AMIIDR are RES0.

Attributes

Field descriptions

When FEAT_AMU_EXT64 is implemented:

Bits [63:32]:

ProductID, bits [31:20]:

Part number of the AMU, bits [11:0]. The part number is selected by the designer of the component.

Matches the part number represented in the Peripheral ID registers AMPIDRn, if those registers are present.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Variant, bits [19:16]:

Component major revision.

Defines either a variant of the component defined by AMIIDR.ProductID, or the major revision of the component. When defining a major revision, AMIIDR.Variant and AMIIDR.Revision together form the revision number of the component, with this field being the most significant part. When a component is changed, AMIIDR.Variant or AMIIDR.Revision is increased to ensure that software can differentiate between different revisions of the component. If this field is increased, AMIIDR.Revision should be set to 0b0000.

Arm recommends this field matches the AMPIDR2.REVISION field, if present.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Revision, bits [15:12]:

Component minor revision.

AMIIDR.Variant and AMIIDR.Revision together form the revision number of the component, with this field being the least significant part. When a component is changed, AMIIDR.Variant or AMIIDR.Revision is increased to ensure that software can differentiate between different revisions of the component. If AMIIDR.Variant field is increased, this field should be set to 0b0000, otherwise the value in this field should be increased.

Arm recommends this field matches the AMPIDR3.REVAND field, if present.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Implementer, bits [11:0]:

Contains the JEP106 manufacturer's identification code of the designer of the AMU.

The code identifies the designer of the component, which might not be the same as the implementer of the device containing the component.

Zero is not a valid JEP106 identification code, meaning a value of zero for AMIIDR indicates this register is not implemented.

For an implementation designed by Arm, this field reads as 0x43B.

Bits [11:8] contain the JEP106 bank identifier of the designer minus 1.

Bit 7 is RES0.

Bits [6:0] contain bits [6:0] of the JEP106 manufacturer's identification code of the designer.

If AMPIDR4 is implemented, AMPIDR4.DES_2 matches bits [11:8] of this field.

If AMPIDR2 is implemented, AMPIDR2.DES_1 matches bits [6:4] of this field.

If AMPIDR1 is implemented, AMPIDR1.DES_0 matches bits [3:0] of this field.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Otherwise:

ProductID, bits [31:20]:

Part number of the AMU, bits [11:0]. The part number is selected by the designer of the component.

Matches the part number represented in the Peripheral ID registers AMPIDRn, if those registers are present.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Variant, bits [19:16]:

Component major revision.

Arm recommends this field matches the AMPIDR2.REVISION field, if present.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Revision, bits [15:12]:

Component minor revision.

Arm recommends this field matches the AMPIDR3.REVAND field, if present.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Implementer, bits [11:0]:

Contains the JEP106 manufacturer's identification code of the designer of the AMU.

The code identifies the designer of the component, which might not be the same as the implementer of the device containing the component.

Zero is not a valid JEP106 identification code, meaning a value of zero for AMIIDR indicates this register is not implemented.

For an implementation designed by Arm, this field reads as 0x43B.

Bits [11:8] contain the JEP106 bank identifier of the designer minus 1.

Bit 7 is RES0.

Bits [6:0] contain bits [6:0] of the JEP106 manufacturer's identification code of the designer.

If AMPIDR4 is implemented, AMPIDR4.DES_2 matches bits [11:8] of this field.

If AMPIDR2 is implemented, AMPIDR2.DES_1 matches bits [6:4] of this field.

If AMPIDR1 is implemented, AMPIDR1.DES_0 matches bits [3:0] of this field.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Access Instructions

Accesses to this register use the following encodings:

When FEAT_AMU_EXT64 is implemented:

Accessible at offset 0xE08 from AMU

When FEAT_RME is implemented, FEAT_AMU_EXTACR is implemented, an access is Secure, and AMROOTCR().RA IN {'001', '000'}, accesses to this register are RAZ/WI.
When FEAT_RME is implemented, FEAT_AMU_EXTACR is implemented, an access is Realm, and AMROOTCR().RA IN {'010', '000'}, accesses to this register are RAZ/WI.
When FEAT_RME is implemented, FEAT_AMU_EXTACR is implemented, an access is Non-secure, and AMROOTCR().RA != '011', accesses to this register are RAZ/WI.
When FEAT_RME is not implemented, FEAT_AMU_EXTACR is implemented, an access is Non-secure, and AMSCR().NSRA == '0', accesses to this register are RAZ/WI.
Otherwise, accesses to this register are RO.

()

When FEAT_AMU_EXT32 is implemented:

Accessible at offset 0xE08 from AMU

When FEAT_RME is implemented, FEAT_AMU_EXTACR is implemented, an access is Secure, and AMROOTCR().RA IN {'001', '000'}, accesses to this register are RAZ/WI.
When FEAT_RME is implemented, FEAT_AMU_EXTACR is implemented, an access is Realm, and AMROOTCR().RA IN {'010', '000'}, accesses to this register are RAZ/WI.
When FEAT_RME is implemented, FEAT_AMU_EXTACR is implemented, an access is Non-secure, and AMROOTCR().RA != '011', accesses to this register are RAZ/WI.
When FEAT_RME is not implemented, FEAT_AMU_EXTACR is implemented, an access is Non-secure, and AMSCR().NSRA == '0', accesses to this register are RAZ/WI.
Otherwise, accesses to this register are RO.

()

63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48	47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0
ProductID												Variant				Revision				Implementer

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ProductID												Variant				Revision				Implementer

Configuration

Attributes

Field descriptions

When FEAT_AMU_EXT64 is implemented:

Bits [63:32]:

ProductID, bits [31:20]:

Variant, bits [19:16]:

Revision, bits [15:12]:

Implementer, bits [11:0]:

Otherwise:

ProductID, bits [31:20]:

Variant, bits [19:16]:

Revision, bits [15:12]:

Implementer, bits [11:0]:

Access Instructions

When FEAT_AMU_EXT64 is implemented:

When FEAT_AMU_EXT32 is implemented: