ASR (vectors)

Arithmetic shift right by vector (predicated)

This instruction shifts right, preserving the sign bit, active elements of the first source vector by the corresponding elements of the second source vector and destructively places the results in the corresponding elements of the first source vector. The shift amount operand is a vector of unsigned elements in which all bits are significant, and not used modulo the element size. Inactive elements in the destination vector register remain unmodified.

SVE class

(FEAT_SVE || FEAT_SME)

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0	0	0	0	0	1	0	0	size		0	1	0	0	0	0	1	0	0	Pg			Zm					Zdn
													R	L	U

Encoding

ASR <Zdn>.<T>, <Pg>/M, <Zdn>.<T>, <Zm>.<T>

Decode

if !IsFeatureImplemented(FEAT_SVE) && !IsFeatureImplemented(FEAT_SME) then EndOfDecode(Decode_UNDEF); constant integer esize = 8 << UInt(size); constant integer g = UInt(Pg); constant integer dn = UInt(Zdn); constant integer m = UInt(Zm);

Assembler Symbols

<Zdn>

Is the name of the first source and destination scalable vector register, encoded in the "Zdn" field.

<T>

Is the size specifier, encoded in size:

size	<T>
00	B
01	H
10	S
11	D

<Pg>	Is the name of the governing scalable predicate register P0-P7, encoded in the "Pg" field.

<Zm>	Is the name of the second source scalable vector register, encoded in the "Zm" field.

Operation

CheckSVEEnabled(); constant integer VL = CurrentVL; constant integer PL = VL DIV 8; constant integer elements = VL DIV esize; constant bits(PL) mask = P[g, PL]; constant bits(VL) operand1 = Z[dn, VL]; constant bits(VL) operand2 = if AnyActiveElement(mask, esize) then Z[m, VL] else Zeros(VL); bits(VL) result; for e = 0 to elements-1 if ActivePredicateElement(mask, e, esize) then constant bits(esize) element1 = Elem[operand1, e, esize]; constant bits(esize) element2 = Elem[operand2, e, esize]; constant integer shift = Min(UInt(element2), esize); Elem[result, e, esize] = ASR(element1, shift); else Elem[result, e, esize] = Elem[operand1, e, esize]; Z[dn, VL] = result;

Operational information

This instruction is a data-independent-time instruction as described in About PSTATE.DIT.

This instruction might be immediately preceded in program order by a MOVPRFX instruction. The MOVPRFX must conform to all of the following requirements, otherwise the behavior of the MOVPRFX and this instruction is CONSTRAINED UNPREDICTABLE:

The MOVPRFX can be predicated or unpredicated.
A predicated MOVPRFX must use the same governing predicate register as this instruction.
A predicated MOVPRFX must use the larger of the destination element size and first source element size in the preferred disassembly of this instruction.
The MOVPRFX must specify the same destination register as this instruction.
The destination register must not refer to architectural register state referenced by any other source operand register of this instruction.

This site is provided as a community resource and is NOT affiliated with nor endorsed by Arm Limited.