Provides information about the instructions implemented in AArch64 state.
For general information about the interpretation of the ID registers, see 'Principles of the ID scheme for fields in ID registers'.
There are no configuration notes.
ID_AA64ISAR0_EL1 is a 64-bit register.
| 63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RNDR | TLB | TS | FHM | DP | SM4 | SM3 | SHA3 | ||||||||||||||||||||||||
| RDM | TME | Atomic | CRC32 | SHA2 | SHA1 | AES | RES0 | ||||||||||||||||||||||||
Indicates support for Random Number instructions in AArch64 state.
When FEAT_RNG_TRAP is implemented, the value returned by a direct read of ID_AA64ISAR0_EL1.RNDR is further controlled by the value of SCR_EL3.TRNDR.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| RNDR | Meaning |
|---|---|
| 0b0000 |
No Random Number instructions are implemented. |
| 0b0001 |
All other values are reserved.
FEAT_RNG implements the functionality identified by the value 0b0001.
From Armv8.5, the permitted values are 0b0000 and 0b0001.
Access to this field is RO.
Indicates support for Outer Shareable and TLB range maintenance instructions.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| TLB | Meaning |
|---|---|
| 0b0000 |
Outer Shareable and TLB range maintenance instructions are not implemented. |
| 0b0001 |
Outer Shareable TLB maintenance instructions are implemented. |
| 0b0010 |
Outer Shareable and TLB range maintenance instructions are implemented. |
All other values are reserved.
FEAT_TLBIOS implements the functionality identified by the values 0b0001 and 0b0010.
FEAT_TLBIRANGE implements the functionality identified by the value 0b0010.
From Armv8.4, the only permitted value is 0b0010.
Access to this field is RO.
Indicates support for flag manipulation instructions.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| TS | Meaning |
|---|---|
| 0b0000 |
No flag manipulation instructions are implemented. |
| 0b0001 |
CFINV, RMIF, SETF16, and SETF8 instructions are implemented. |
| 0b0010 |
CFINV, RMIF, SETF16, SETF8, AXFLAG, and XAFLAG instructions are implemented. |
All other values are reserved.
FEAT_FlagM implements the functionality identified by the value 0b0001.
FEAT_FlagM2 implements the functionality identified by the value 0b0010.
In Armv8.2, the permitted values are 0b0000 and 0b0001.
In Armv8.4, the only permitted value is 0b0001.
From Armv8.5, the only permitted value is 0b0010.
Access to this field is RO.
Indicates support for FMLAL and FMLSL instructions.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| FHM | Meaning |
|---|---|
| 0b0000 |
FMLAL and FMLSL instructions are not implemented. |
| 0b0001 |
FMLAL and FMLSL instructions are implemented. |
All other values are reserved.
FEAT_FHM implements the functionality identified by the value 0b0001.
From Armv8.2, the permitted values are 0b0000 and 0b0001.
Access to this field is RO.
Indicates support for Dot Product instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| DP | Meaning |
|---|---|
| 0b0000 |
No Dot Product instructions implemented. |
| 0b0001 |
UDOT and SDOT instructions implemented. |
All other values are reserved.
FEAT_DotProd implements the functionality identified by the value 0b0001.
From Armv8.2, the permitted values are 0b0000 and 0b0001.
Access to this field is RO.
Indicates support for SM4 instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SM4 | Meaning |
|---|---|
| 0b0000 |
No SM4 instructions implemented. |
| 0b0001 |
SM4E and SM4EKEY instructions implemented. |
All other values are reserved.
If FEAT_SM4 is not implemented, the value 0b0001 is reserved.
From Armv8.2, the permitted values are 0b0000 and 0b0001.
This field must have the same value as ID_AA64ISAR0_EL1.SM3.
Access to this field is RO.
Indicates support for SM3 instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SM3 | Meaning |
|---|---|
| 0b0000 |
No SM3 instructions implemented. |
| 0b0001 |
SM3SS1, SM3TT1A, SM3TT1B, SM3TT2A, SM3TT2B, SM3PARTW1, and SM3PARTW2 instructions implemented. |
All other values are reserved.
If FEAT_SM3 is not implemented, the value 0b0001 is reserved.
FEAT_SM3 implements the functionality identified by the value 0b0001.
From Armv8.2, the permitted values are 0b0000 and 0b0001.
This field must have the same value as ID_AA64ISAR0_EL1.SM4.
Access to this field is RO.
Indicates support for SHA3 instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SHA3 | Meaning |
|---|---|
| 0b0000 |
No SHA3 instructions implemented. |
| 0b0001 |
EOR3, RAX1, XAR, and BCAX instructions implemented. |
All other values are reserved.
If FEAT_SHA3 is not implemented, the value 0b0001 is reserved.
FEAT_SHA3 implements the functionality identified by the value 0b0001.
From Armv8.2, the permitted values are 0b0000 and 0b0001.
If the value of ID_AA64ISAR0_EL1.SHA1 is 0b0000, this field must have the value 0b0000.
If the value of this field is 0b0001, ID_AA64ISAR0_EL1.SHA2 must have the value 0b0010.
Access to this field is RO.
Indicates support for SQRDMLAH and SQRDMLSH instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| RDM | Meaning |
|---|---|
| 0b0000 |
No RDMA instructions implemented. |
| 0b0001 |
SQRDMLAH and SQRDMLSH instructions implemented. |
All other values are reserved.
FEAT_RDM implements the functionality identified by the value 0b0001.
From Armv8.1, the only permitted value is 0b0001.
Access to this field is RO.
Indicates support for TME instructions.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| TME | Meaning |
|---|---|
| 0b0000 |
TME instructions are not implemented. |
| 0b0001 |
TCANCEL, TCOMMIT, TSTART, and TTEST instructions are implemented. |
All other values are reserved.
Accessing this field has the following behavior:
Indicates support for Atomic instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| Atomic | Meaning |
|---|---|
| 0b0000 |
No Atomic instructions implemented. |
| 0b0010 |
LDADD, LDCLR, LDEOR, LDSET, LDSMAX, LDSMIN, LDUMAX, LDUMIN, CAS, CASP, and SWP instructions implemented. |
| 0b0011 |
As for 0b0010, plus 128-bit instructions LDCLRP, LDSETP and SWPP. |
All other values are reserved.
FEAT_LSE implements the functionality identified by the value 0b0010.
FEAT_LSE128 implements the functionality identified by the value 0b0011.
From Armv8.1, the value 0b0000 is not permitted.
Access to this field is RO.
Indicates support for CRC32 instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| CRC32 | Meaning |
|---|---|
| 0b0000 |
CRC32 instructions are not implemented. |
| 0b0001 |
CRC32B, CRC32H, CRC32W, CRC32X, CRC32CB, CRC32CH, CRC32CW, and CRC32CX instructions are implemented. |
All other values are reserved.
FEAT_CRC32 implements the functionality identified by the value 0b0001.
In Armv8.0, the permitted values are 0b0000 and 0b0001.
From Armv8.1, the only permitted value is 0b0001.
Access to this field is RO.
Indicates support for SHA2 instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SHA2 | Meaning |
|---|---|
| 0b0000 |
No SHA2 instructions implemented. |
| 0b0001 |
Implements instructions: SHA256H, SHA256H2, SHA256SU0, and SHA256SU1. |
| 0b0010 | Implements instructions:
|
All other values are reserved.
FEAT_SHA256 implements the functionality identified by the value 0b0001.
FEAT_SHA512 implements the functionality identified by the value 0b0010.
If the value of ID_AA64ISAR0_EL1.SHA1 is 0b0000, this field must have the value 0b0000.
If the value of this field is 0b0010, ID_AA64ISAR0_EL1.SHA3 must have the value 0b0001.
Access to this field is RO.
Indicates support for SHA1 instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SHA1 | Meaning |
|---|---|
| 0b0000 |
No SHA1 instructions implemented. |
| 0b0001 |
SHA1C, SHA1P, SHA1M, SHA1H, SHA1SU0, and SHA1SU1 instructions implemented. |
All other values are reserved.
FEAT_SHA1 implements the functionality identified by the value 0b0001.
If the value of ID_AA64ISAR0_EL1.SHA2 is 0b0000, this field must have the value 0b0000.
Access to this field is RO.
Indicates support for AES instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| AES | Meaning |
|---|---|
| 0b0000 |
No AES instructions implemented. |
| 0b0001 |
AESE, AESD, AESMC, and AESIMC instructions implemented. |
| 0b0010 |
As for 0b0001, plus PMULL and PMULL2 instructions operating on 64-bit source elements. |
FEAT_AES implements the functionality identified by the value 0b0001.
FEAT_PMULL implements the functionality identified by the value 0b0010.
All other values are reserved.
Access to this field is RO.
Reserved, RES0.
Accesses to this register use the following encodings in the System register encoding space:
MRS <Xt>, ID_AA64ISAR0_EL1
| op0 | op1 | CRn | CRm | op2 |
|---|---|---|---|---|
| 0b11 | 0b000 | 0b0000 | 0b0110 | 0b000 |
if PSTATE.EL == EL0 then if IsFeatureImplemented(FEAT_IDST) then if EL2Enabled() && HCR_EL2.TGE == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else AArch64.SystemAccessTrap(EL1, 0x18); else UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && HCR_EL2.TID3 == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else X[t, 64] = ID_AA64ISAR0_EL1; elsif PSTATE.EL == EL2 then X[t, 64] = ID_AA64ISAR0_EL1; elsif PSTATE.EL == EL3 then X[t, 64] = ID_AA64ISAR0_EL1;