← Home

AMCR_EL0: Activity Monitors Control Register

Purpose

Global control register for the activity monitors implementation. AMCR_EL0 is applicable to both the architected and the auxiliary counter groups.

Configuration

AArch64 System register AMCR_EL0 bits [31:0] are architecturally mapped to AArch32 System register AMCR[31:0].

AArch64 System register AMCR_EL0 bits [31:0] are architecturally mapped to External register AMU.AMCR[31:0] when FEAT_AMU_EXT32 is implemented.

AArch64 System register AMCR_EL0 bits [63:0] are architecturally mapped to External register AMU.AMCR[63:0] when FEAT_AMU_EXT64 is implemented.

This register is present only when FEAT_AMUv1 is implemented. Otherwise, direct accesses to AMCR_EL0 are UNDEFINED.

Attributes

AMCR_EL0 is a 64-bit register.

Field descriptions

6362616059585756555453525150494847464544434241403938373635343332
313029282726252423222120191817161514131211109876543210
RES0
RES0CG1RZRES0HDBGRES0

Bits [63:18]

Reserved, RES0.

CG1RZ, bit [17]

When FEAT_AMUv1p1 is implemented:

Counter Group 1 Read Zero.

CG1RZMeaning
0b0

System register reads of AMEVCNTR1<n>_EL0 return the event count at all implemented and enabled Exception levels.

0b1

If the current Exception level is the highest implemented Exception level, system register reads of AMEVCNTR1<n>_EL0 return the event count. Otherwise, reads of AMEVCNTR1<n>_EL0 return a zero value.

Note

Reads from the memory-mapped view are unaffected by this field.

The reset behavior of this field is:



Otherwise:

Reserved, RES0.

Bits [16:11]

Reserved, RES0.

HDBG, bit [10]

This bit controls whether activity monitor counting is halted when the PE is halted in Debug state.

HDBGMeaning
0b0

Activity monitors do not halt counting when the PE is halted in Debug state.

0b1

Activity monitors halt counting when the PE is halted in Debug state.

The reset behavior of this field is:

Bits [9:0]

Reserved, RES0.

Accessing AMCR_EL0

Accesses to this register use the following encodings in the System register encoding space:

MRS <Xt>, AMCR_EL0

op0op1CRnCRmop2
0b110b0110b11010b00100b000

if PSTATE.EL == EL0 then if HaveEL(EL3) && EL3SDDUndefPriority() && CPTR_EL3.TAM == '1' then UNDEFINED; elsif AMUSERENR_EL0.EN == '0' then if EL2Enabled() && HCR_EL2.TGE == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else AArch64.SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && CPTR_EL2.TAM == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && CPTR_EL3.TAM == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 64] = AMCR_EL0; elsif PSTATE.EL == EL1 then if HaveEL(EL3) && EL3SDDUndefPriority() && CPTR_EL3.TAM == '1' then UNDEFINED; elsif EL2Enabled() && CPTR_EL2.TAM == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && CPTR_EL3.TAM == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 64] = AMCR_EL0; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && EL3SDDUndefPriority() && CPTR_EL3.TAM == '1' then UNDEFINED; elsif HaveEL(EL3) && CPTR_EL3.TAM == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 64] = AMCR_EL0; elsif PSTATE.EL == EL3 then X[t, 64] = AMCR_EL0;

MSR AMCR_EL0, <Xt>

op0op1CRnCRmop2
0b110b0110b11010b00100b000

if IsHighestEL(PSTATE.EL) then AMCR_EL0 = X[t, 64]; else UNDEFINED;