Clean data or unified cache line by virtual address to PoU.
AArch32 System instruction DCCMVAU performs the same function as AArch64 System instruction DC CVAU.
This instruction is present only when EL1 is capable of using AArch32. Otherwise, direct accesses to DCCMVAU are UNDEFINED.
DCCMVAU is a 32-bit System instruction.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| VA | |||||||||||||||||||||||||||||||
Virtual address to use. No alignment restrictions apply to this VA.
Execution of this instruction might require an address translation from VA to PA, and that translation might fault. For more information, see 'AArch32 data cache maintenance instructions (DC*)'.
Accesses to this instruction use the following encodings in the System instruction encoding space:
MCR{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}
| coproc | opc1 | CRn | CRm | opc2 |
|---|---|---|---|---|
| 0b1111 | 0b000 | 0b0111 | 0b1011 | 0b001 |
if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T7 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T7 == '1' then AArch32.TakeHypTrapException(0x03); elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TPU == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TOCU == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HCR.TPU == '1' then AArch32.TakeHypTrapException(0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HCR2.TOCU == '1' then AArch32.TakeHypTrapException(0x03); else AArch32.DC(R[t], CacheOp_Clean, CacheOpScope_PoU); elsif PSTATE.EL == EL2 then AArch32.DC(R[t], CacheOp_Clean, CacheOpScope_PoU); elsif PSTATE.EL == EL3 then AArch32.DC(R[t], CacheOp_Clean, CacheOpScope_PoU);