Performs a stage 1 address translation at PL1 and in the current Security state, where the value of PSTATE.PAN determines if a read from a location will generate a Permission fault for a privileged access.
This instruction is present only when EL1 is capable of using AArch32 and FEAT_PAN2 is implemented. Otherwise, direct accesses to ATS1CPRP are UNDEFINED.
ATS1CPRP is a 32-bit System instruction.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| IA | |||||||||||||||||||||||||||||||
Input address for translation. The resulting address can be read from the PAR.
This System instruction takes a VA as input. If EL2 is implemented and enabled in the current Security state, the resulting address is the IPA that is the output address of the stage 1 translation. Otherwise, the resulting address is a PA.
Accesses to this instruction use the following encodings in the System instruction encoding space:
MCR{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}
| coproc | opc1 | CRn | CRm | opc2 |
|---|---|---|---|---|
| 0b1111 | 0b000 | 0b0111 | 0b1001 | 0b000 |
if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T7 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T7 == '1' then AArch32.TakeHypTrapException(0x03); else AArch32.AT(R[t], TranslationStage_1, EL1, ATAccess_ReadPAN); elsif PSTATE.EL == EL2 then AArch32.AT(R[t], TranslationStage_1, EL1, ATAccess_ReadPAN); elsif PSTATE.EL == EL3 then if SCR.NS == '0' then AArch32.AT(R[t], TranslationStage_1, EL3, ATAccess_ReadPAN); else AArch32.AT(R[t], TranslationStage_1, EL1, ATAccess_ReadPAN);